|
|
 |
 |
|
6 Steps To Buying Vinyl Fencing
All vinyl fencing is not the same.
Vinyl fencing quality varies depending on the manufacturer. There are many types of fencing out there and many different vendors, but by considering the following aspects of a vinyl fencing purchase you will get...
Beautiful, Sparkling Chandeliers!
If you want to add extra spark to rooms, consider adding chandeliers to the rooms. Chandeliers offer added elegance and charm as well as light. There are many to choose from and these can be custom made as well. A popular choice is the crystal...
Closet Organizing Tips: Systems for Conquering Closet Clutter
Closet organizing indicates that you value the simple home improvement of added closet space. Below you'll find simple ideas to get your closets organized:
A good suggestion for starters is to plan your closet with hanging rods nearest the outside...
Faucet Care and Maintenance -- What Every Homeowner Should Know
(ARA) - Consider the number of times you run your hands under it quickly while cooking. What about rinsing plates or filling a glass or pot with water? When the kitchen faucet isn’t working properly, the kitchen doesn’t run smoothly.
Just as...
What is Injection Waterproofing? -
Injection waterproofing is often used to fill and seal cracks and crevices. The material is most often made from a polyurethane compound. The compound is lightweight and expands up to twice its original size when applied to a surface. Many...
|
|
| |
|
|
|
|
Strapping a Ceiling
Prior to hanging sheetrock to ceiling joists it is important that strapping first be installed.
Strapping helps prevent cracks from showing up later in your home’s ceiling, as well as provides more surface area for securing the sheetrock to the ceiling.
Strapping typically consists of 1”x 3” boards that are nailed perpendicular to the ceiling joists. Strapping can be purchased at any home improvement center as individual sticks or in bundles of 10, and comes in lengths from 8 to 16 feet.
Strapping should be applied every 16 inches on center perpendicular to, and across, the ceiling joists. Care should be made in installing the strapping such that two pieces of abutting sheetrock each have access to approximately 1.5” of surface area of the strapping material. For example, the centerline of the 3rd row of strapping from a wall should be at 48 inches (the width of a piece of sheetrock). Not the edge of the strapping!
The installation of strapping
is straight forward in concept, however significant care should be given to ensure that it is securely nailed and runs straight. Otherwise the sheetrocking effort may not go smoothly or be installed properly.
On pitched ceilings, it may help to use a chalk line and level to ensure straight lines. Also, the use of a Nail Gun is very helpful in this task, as nailing over one’s head can quickly become tiring. Not to mention, the job goes much faster.
About The Author
Over the past 20+ years Mark Donovan has been involved with building homes and additions to homes. His projects have included: building a vacation home, building additions and garages on to existing homes, and finishing unfinished homes. For more home improvement information visit http://www.homeadditionplus.com and http://www.homeaddition.blogspot.com.
|
|
|
|
|
 |
|
|